Liner, Resin & Cal Tube
Are you interested in becoming a certified Flow-Liner Installer?
Flow-Liner® liner and resin systems meet or exceed Flow-Liner® Quality System Program minimum testing requirements.
Tested to ASTM F1216-09, ASTM F1743-08, and NSF-14 standards also recognized by the Uniform Plumbing Code & International Plumbing Code.
Flow-Liner® specializes in pipe lining sizes from 2" to 12" inside diameter, other sizes available upon request.
Flow-Liner® Flex - Pipe Lining requiring maximum flexibility and maximum resin capacity
Flow-Liner® Mini-Flex - Small diameter pipe lining requiring maximum flexibility and maximum resin capacity
Flow-Liner® Standard - Pipe Lining requiring a tough membrane combined with a strong durable substrate
Flow-Liner® Semi-Flex - Pipe Lining requiring a flexible membrane combined with a strong durable substrate
Epoxy Base Resins and Hardeners
Flow-Liner® Standard Base Resin - Color tinted for proper mixing
Flow-Liner® Epoxy F-15 Hardener - 15 minute pot life
Flow-Liner® Epoxy F-30 Hardener - 30 minute pot life
Flow-Liner® Epoxy F-60 Hardener - 60 minute pot life
Flow-Liner® Epoxy F-180 Hardener - 180 minute pot life
If purchasing liners and resins is of interest to you, please fill out a new Installer Application.
Flow-Liner® also offers calibration tubes, which can be bought separately.
- Green - Standard flexible calibration tube for ambient temperature curing
- Orange - Standard flexible calibration tube for hot water or steam curing
- White - Durable with high temperature resistance for hot water or steam curing of CIPP liners; great for large diameter pipe
- Translucent - Flexible and durable for use with ambient, hot water, or steam curing of CIPP liners; great for all sizes of pipe.
The information and data described are made to the best of our knowledge and belief on the basis of our experience, but have
no binding effect. Flow-Liner® products must be installed by a trained and certified Flow-Liner® Installer.
Flow-Liner® products help maintain and extend the life of existing pipes or conduits. Flow-Liner®
products must only be used in an existing approved and certified pipe or conduit, which meets the standards
or specifications in which it is intended to be used for. Failure to do this may jeopardize the pipe or conduit's performance and safety.